Cesco Earthenware and Stoneware Gloss Glazes

Ready to use, minus 2ppm lead free brush on glaze. Developed for use over white clay bodies. Use over terracotta and coloured clays can result in different colour responses, testing is recommended. Directions for use: Stir well. Apply with as large a brush as possible and flow on three even coats to a thickness of approximately 1mm. Allow each coat to dry for about one minute before applying the next coat. Insufficient thickness will result in poor colour development. Thin fresh glazes only with water if required for dipping or spraying. Care should be taken if reconstituting glazes that have dried out as glaze faults can develop in firing. Replace lid after use ensuring rim and lid are clean so a good seal is achieved. Store in a cool dry place away from sunlight.